Termite Treatment Options in Arcadia, FL for 2025

Biological pest control is a method of controlling pests such as insects and mites by using other organisms.^[12] It relies on predation, parasitism, herbivory, parasitody or other natural mechanisms, but typically also involves an active human management role. Classical biological control involves the introduction of natural enemies of the pest that are bred in the laboratory and released into the environment. An alternative approach is to augment the natural enemies that occur in a particular area by releasing more, either in small, repeated batches, or in a single large-scale release. Ideally, the released organism will breed and survive, and provide long-term control.^[13] Biological control can be an important component of an integrated pest management programme.

For example: mosquitoes are often controlled by putting Bt Bacillus thuringiensis ssp. israelensis, a bacterium that infects and kills mosquito larvae, in local water sources.^[14]

Mechanical pest control is the use of hands-on techniques as well as simple equipment and devices, that provides a protective barrier between plants and insects. This is referred to as tillage and is one of the oldest methods of weed control as well as being useful for pest control; wireworms, the larvae of the common click beetle, are very destructive pests of newly ploughed grassland, and repeated cultivation exposes them to the birds and other predators that feed on them.^[15]

Crop rotation can help to control pests by depriving them of their host plants. It is a major tactic in the control of corn rootworm, and has reduced early season incidence of Colorado potato beetle by as much as 95%.^[16]

A trap crop is a crop of a plant that attracts pests, diverting them from nearby crops.^[17] Pests aggregated on the trap crop can be more easily controlled using pesticides or other methods.^[18] However, trap-cropping, on its own, has often failed to cost effectively reduce pest densities on large commercial scales, without the use of pesticides, possibly due to the pests' ability to disperse back into the main field.^[18]

Pesticides are substances applied to crops to control pests, they include herbicides to kill weeds, fungicides to kill fungi and insecticides to kill insects. Application methods include sprays by hand, tractors, or aircraft or as seed dressings. To be effective, the correct substance must be applied at the correct time and the method of application is important to ensure adequate coverage and retention on the crop. The killing of natural enemies of the target pest should be minimized. This is particularly important in countries where there are natural reservoirs of pests and their enemies in the countryside surrounding plantation crops, and these co-exist in a delicate balance. Often in less-developed countries, the crops are well adapted to the local situation and no pesticides are needed. Where progressive farmers are using fertilizers to grow improved crop varieties, these are often more susceptible to pest damage, but the indiscriminate application of pesticides may be detrimental in the longer term.^{[19][unreliable source?][failed verification]} The efficacy of chemical pesticides tends to diminish over time. This is because any organism that manages to survive the initial application will pass on its genes to its offspring and a resistant strain will be developed. In this way, some of the most serious pests have developed resistance and are no longer killed by pesticides that used to kill their ancestors. This necessitates higher concentrations of chemical, more frequent applications and a movement to more expensive formulations.^[20]

Pesticides are intended to kill pests, but many have detrimental effects on non-target species; of particular concern is the damage done to honey-bees, solitary bees and other pollinating insects and in this regard, the time of day when the spray is applied can be important.^[21] The widely used neonicotinoids have been banned on flowering crops in some countries because of their effects on bees.^[21] Some pesticides may cause cancer and other health problems in humans, as well as being harmful to wildlife.^[22] There can be acute effects immediately after exposure or chronic effects after continuous low-level, or occasional exposure.^[23] Maximum residue limits for pesticides in foodstuffs and animal feed are set by many nations.^[24]

Using crops with inheritable resistance to pests is referred to as host-plant resistance and reduces the need for pesticide use. These crops can harm or even kill pests, repel feeding, prevent colonization, or tolerate the presence of a pest without significantly impacting yield.^[25][26][27] Resistance can also occur through genetic engineering to have traits with resistance to insects, such as with Bt corn, or papaya resistance to ringspot virus.^[28] When farmers are purchasing seed, variety information often includes resistance to selected pests in addition to other traits.^[29]

Pest control can also be achieved via culling the pest animals — generally small- to medium-sized wild or feral mammals or birds that inhabit the ecological niches near farms, pastures or other human settlements — by employing human hunters or trappers to physically track down, kill and remove them from the area. The culled animals, known as vermin, may be targeted because they are deemed harmful to agricultural crops, livestock or facilities; serve as hosts or vectors that transmit pathogens across species or to humans; or for population control as a mean of protecting other vulnerable species and ecosystems.^[30]

Pest control via hunting, like all forms of harvest, has imposed an artificial selective pressure on the organisms being targeted. While varmint hunting is potentially selecting for desired behavioural and demographic changes (e.g. animals avoiding human populated areas, crops and livestock), it can also result in unpredicted outcomes such as the targeted animal adapting for faster reproductive cycles.^[31]

Forest pests present a significant problem because it is not easy to access the canopy and monitor pest populations. In addition, forestry pests such as bark beetles, kept under control by natural enemies in their native range, may be transported large distances in cut timber to places where they have no natural predators, enabling them to cause extensive economic damage.^[32] Pheromone traps have been used to monitor pest populations in the canopy. These release volatile chemicals that attract males. Pheromone traps can detect the arrival of pests or alert foresters to outbreaks. For example, the spruce budworm, a destructive pest of spruce and balsam fir, has been monitored using pheromone traps in Canadian forests for several decades.^[33] In some regions, such as New Brunswick, areas of forest are sprayed with pesticide to control the budworm population and prevent the damage caused during outbreaks.^[34]

Many unwelcome animals visit or make their home in residential buildings, industrial sites and urban areas. Some contaminate foodstuffs, damage structural timbers, chew through fabrics or infest stored dry goods. Some inflict great economic loss, others carry diseases or cause fire hazards, and some are just a nuisance. Control of these pests has been attempted by improving sanitation and garbage control, modifying the habitat, and using repellents, growth regulators, traps, baits and pesticides.^[35]

Physical pest control involves trapping or killing pests such as insects and rodents. Historically, local people or paid rat-catchers caught and killed rodents using dogs and traps.^[36] On a domestic scale, sticky flypapers are used to trap flies. In larger buildings, insects may be trapped using such means as pheromones, synthetic volatile chemicals or ultraviolet light to attract the insects; some have a sticky base or an electrically charged grid to kill them. Glueboards are sometimes used for monitoring cockroaches and to catch rodents. Rodents can be killed by suitably baited spring traps and can be caught in cage traps for relocation. Talcum powder or "tracking powder" can be used to establish routes used by rodents inside buildings and acoustic devices can be used for detecting beetles in structural timbers.^[35]

Historically, firearms have been one of the primary methods used for pest control. "Garden Guns" are smooth bore shotguns specifically made to fire .22 caliber snake shot or 9mm Flobert, and are commonly used by gardeners and farmers for snakes, rodents, birds, and other pest. Garden Guns are short-range weapons that can do little harm past 15 to 20 yards, and they're relatively quiet when fired with snake shot, compared to standard ammunition. These guns are especially effective inside of barns and sheds, as the snake shot will not shoot holes in the roof or walls, or more importantly, injure livestock with a ricochet. They are also used for pest control at airports, warehouses, stockyards, etc.^[37]

The most common shot cartridge is .22 Long Rifle loaded with #12 shot. At a distance of about 10 ft (3.0 m), which is about the maximum effective range, the pattern is about 8 in (20 cm) in diameter from a standard rifle. Special smoothbore shotguns, such as the Marlin Model 25MG can produce effective patterns out to 15 or 20 yards using .22 WMR shotshells, which hold 1/8 oz. of #12 shot contained in a plastic capsule.

Poisoned bait is a common method for controlling rats, mice, birds, slugs, snails, ants, cockroaches, and other pests. The basic granules, or other formulation, contains a food attractant for the target species and a suitable poison. For ants, a slow-acting toxin is needed so that the workers have time to carry the substance back to the colony, and for flies, a quick-acting substance to prevent further egg-laying and nuisance.^[38] Baits for slugs and snails often contain the molluscide metaldehyde, dangerous to children and household pets.^[39]

An article in Scientific American in 1885 described effective elimination of a cockroach infestation using fresh cucumber peels.^[40]

Warfarin has traditionally been used to kill rodents, but many populations have developed resistance to this anticoagulant, and difenacoum may be substituted. These are cumulative poisons, requiring bait stations to be topped up regularly.^[38] Poisoned meat has been used for centuries to kill animals such as wolves^[41] and birds of prey.^[42] Poisoned carcasses however kill a wide range of carrion feeders, not only the targeted species.^[41] Raptors in Israel were nearly wiped out following a period of intense poisoning of rats and other crop pests.^[43]

Fumigation is the treatment of a structure to kill pests such as wood-boring beetles by sealing it or surrounding it with an airtight cover such as a tent, and fogging with liquid insecticide for an extended period, typically of 24–72 hours. This is costly and inconvenient as the structure cannot be used during the treatment, but it targets all life stages of pests.^[44]

An alternative, space treatment, is fogging or misting to disperse a liquid insecticide in the atmosphere within a building without evacuation or airtight sealing, allowing most work within the building to continue, at the cost of reduced penetration. Contact insecticides are generally used to minimize long-lasting residual effects.^[44]

Populations of pest insects can sometimes be dramatically reduced by the release of sterile individuals. This involves the mass rearing of a pest, sterilising it by means of X-rays or some other means, and releasing it into a wild population. It is particularly useful where a female only mates once and where the insect does not disperse widely.^[45] This technique has been successfully used against the New World screw-worm fly, some species of tsetse fly, tropical fruit flies, the pink bollworm and the codling moth, among others.^[46]

To chemically sterilize pests using chemosterilants, laboratory studies conducted using U-5897 (3-chloro-1,2-propanediol) attempted in the early 1970s for rat control, although these proved unsuccessful.^[47] In 2013, New York City tested sterilization traps,^[48] demonstrating a 43% reduction in rat populations.^[48] The product ContraPest was approved for the sterilization of rodents by the U.S. Environmental Protection Agency in August 2016 as a chemosterilant.^[49]

Boron, a known pesticide can be impregnated into the paper fibers of cellulose insulation at certain levels to achieve a mechanical kill factor for self-grooming insects such as ants, cockroaches, termites, and more. The addition of insulation into the attic and walls of a structure can provide control of common pests in addition to known insulation benefits such a robust thermal envelope and acoustic noise-canceling properties. The EPA regulates this type of general-use pesticide within the United States allowing it to only be sold and installed by licensed pest management professionals as part of an integrated pest management program.^[50] Simply adding Boron or an EPA-registered pesticide to an insulation does not qualify it as a pesticide. The dosage and method must be carefully controlled and monitored.

Birds are a significant hazard to aircraft, but it is difficult to keep them away from airfields. Several methods have been explored. Stunning birds by feeding them a bait containing stupefying substances has been tried,^[51] and it may be possible to reduce their numbers on airfields by reducing the number of earthworms and other invertebrates by soil treatment.^[51] Leaving the grass long on airfields rather than mowing it is also a deterrent to birds.^[52] Sonic nets are being trialled; these produce sounds that birds find distracting and seem effective at keeping birds away from affected areas.^[53]

• Bee removal
• Electronic pest control
• Garden guns
• Nuisance wildlife management
• Rabbits in Australia
• Wildlife contraceptive

• Pest Control and Pesticide Safety for Consumers

 

27°12′54″N 81°51′32″W / 27.215°N 81.859°W / 27.215; -81.859 (27.2176, –81.8599). The Peace River flows past the west side of the city on its way southwest to tidewater at Punta Gorda. Nearby Southeast Arcadia occupies a larger section of land, hosting a nearly equal, yet more dispersed population. Most of Arcadia is more than 40 feet (12 m) above sea level and portions of Arcadia near the center of the city are as high as 65 feet (20 m) above sea level, giving Arcadia one of the highest elevations for a city in Florida.

U.S. Route 17 passes through the center of Arcadia, leading north 50 miles (80 km) to Bartow and southwest 26 miles (42 km) to its terminus at Punta Gorda. Florida State Road 70 crosses US 17 in the center of Arcadia and leads east 64 miles (103 km) to Okeechobee and west-northwest 48 miles (77 km) to South Bradenton. Via SR 72, which splits from SR 70 just west of Arcadia, it is 44 miles (71 km) west to South Sarasota.

According to the United States Census Bureau, Arcadia has a total area of 4.1 square miles (10.6 km²), of which 0.01 square miles (0.02 km²), or 0.15%, is covered by water.

According to the Köppen climate classification, Arcadia has a humid subtropical climate (Cfa/Cwa), with hot, humid summers and warm, drier winters.

Historical population

Census	Pop.	Note	%±
1900	799		—
1910	1,736		117.3%
1920	3,479		100.4%
1930	4,082		17.3%
1940	4,055		−0.7%
1950	4,764		17.5%
1960	5,889		23.6%
1970	5,658		−3.9%
1980	6,002		6.1%
1990	6,488		8.1%
2000	6,604		1.8%
2010	7,637		15.6%
2020	7,420		−2.8%
U.S. Decennial Census[15]

Arcadia racial composition
(Hispanics excluded from racial categories)
(NH = Non-Hispanic)

Race	Pop 2010[16]	Pop 2020[17]	% 2010	% 2020
White (NH)	3,062	2,905	40.09%	39.15%
Black or African American (NH)	1,876	1,825	24.56%	24.60%
Native American or Alaska Native (NH)	10	12	0.13%	0.16%
Asian (NH)	51	67	0.67%	0.90%
Pacific Islander or Native Hawaiian (NH)	0	0	0.00%	0.00%
Some other race (NH)	8	23	0.10%	0.31%
Two or more races/Multiracial (NH)	96	232	1.26%	3.13%
Hispanic or Latino (any race)	2,534	2,356	33.18%	31.75%
Total	7,637	7,420

As of the 2020 United States census, there were 7,420 people, 2,953 households, and 1,755 families residing in the city.^[18]

In 2020, about 5.1% of the population were under 5 years old, 26.2% were under 18, and 13.7% were 65 and over; 49.9% of the population were female.^[19]

In 2020, 256 veterans were living in the city and 14.7% of the population were foreign-born. About 69.5% of the households had a computer and 58.0% had a broadband internet subscription. Around 80.9% of the population 25 and older were high-school graduates and 15.2% of that same population had a bachelor's degree or higher. Around 7.4% of the population under 65 had a disability and 17.3% of that same population did not have health insurance.^[19]

In 2020, the median household income was $34,003 and the per capita income was $18,376; 30.2% of the population lived below the poverty threshold.^[19]

As of the 2010 United States census, there were 7,637 people, 2,460 households, and 1,664 families residing in the city.^[20]

The City of Arcadia was created by an act of the Florida Legislature in 1886. Currently, the city is governed by a mayor-council form of government, with five council members elected at large to four-year terms of office, who in turn appoint a city manager to run the daily operation of the city. The council annually chooses a mayor and deputy mayor, who serve in the capacity of chairman of meetings and at ceremonial functions. Also elected by the residents is a city marshal who acts as chief of police. In addition to police service, the city provides residents with a water/sewer system, trash pickup, planning and zoning services, and public works.

Arcadia Municipal Airport is a public-use airport located 1 mile (1.6 km) southeast of the central business district. The City of Arcadia operates the day-to-day operations of the airport. The airport has a deep history of aviation, with the old Carlstrom and Dorr training fields in DeSoto County. It is leading the state in low fuel prices and has a fly-in and camp facility called Aviation City. Arcadia Municipal Airport hosts an annual Aviation Day event in March. The event consists of a static display of aircraft, biplane rides, helicopter rides, and a skydiving demonstration, but bigger plans are in the works.

Arcadia is located on the Peace River, the major tributary of the Charlotte Harbor estuary. The river offers fine canoeing, shark-tooth hunting, and natural habitats. Tours, recreational accessories, and accommodations are readily available.

Arcadia hosts DeSoto County's annual fair usually in the month of January. While traditional aspects of a fair or carnival are provided, the event also presents livestock shows consisting of swine and cattle, which are presented by the local FFA and 4-H.

Arcadia is also the home of three rodeos. These events, which are managed by the local rodeo association, occur during the month of March, the Fourth of July holiday, and in the fall. From the profits of these events many local charities, college scholarships and causes receive funding.

Arcadia is one of the largest groupings of antique dealers in the state, all located conveniently in the downtown area. The local dealers' association sponsors a "4th Saturday Antique Fair" each month from 8 am to 3 pm, bringing an additional 60 to 120 independent dealers in for the event.

Arcadia has numerous parades throughout the year—a Martin Luther King Jr. Day parade, a March rodeo parade, a Cinco de Mayo parade, an Independence Day parade, an October Homecoming parade, a Veterans Day parade, and a Christmas parade.

• WCXS (1480 Classic Country)
• WSRQ-FM (106.9 SRQ)
• WZSP-FM (105.3 La Zeta)
• The Arcadian, local print newspaper

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources in this section. Unsourced material may be challenged and removed. (May 2021) (Learn how and when to remove this message)

• Al Alberts - lead singer of The Four Aces
• Christina Bohannan, Iowa House of Representatives and Candidate for Congress in Iowa's 1st Congressional District in 2022
• Chris Clemons - professional National Football League player for the Miami Dolphins and Arizona Cardinals
• James L. Dozier - retired US Army general
• Brian Labrie - reality TV star and world record holder from the Science Channel’s Punkin’ Chunkin’ TV show
• T. J. Luther - professional football player in the NFL
• Bitsy Mott - born in Arcadia, Major League Baseball player
• Ray brothers - HIV activists
• Joey Redner - founder of Cigar City Brewing Company
• James Joseph Richardson, man wrongly convicted of poisoning his seven young children in October 1967^[21]
• John Paul Riddle - co-founder of Embry-Riddle Aeronautical University
• Brad Scott - former coach at Clemson Tigers
• Jeff Scott - head football coach of the South Florida Bulls
• Chesterfield Smith - president of the American Bar Association in 1973–1974

• City of Arcadia official website
• DeSoto Arts and Humanities Council Archived August 5, 2012, at the Wayback Machine
• DeSoto County Historical Society
• Desoto County Tourism Development Council
• Directory of the Peace River Valley